Tank station, over Modbus TCP MON/S00 → unit 1 @ 127.0.0.1:1502

device ----
The tank dashes: warning and alarm limits
level
-- %
--
temperature
-- C
--
pump running hours
-- h
Register 2, bit by bit pro_adr="2.0" / "2.1" / "2.2"
pump running drain valve open device's high-temp flag
One status register, three points - no script takes it apart.
What the wire says, and what it means one poll a second: ONE request for all of it
pointregisteron the wire (pro)scalingvalue (val)state
The device only knows counts: 723 in register 0 is 72.3 % because val_cnv_dlt="0.1" says so. The limits and the alarm state are configuration too (ALM.onlvl) - the colour comes from the point's sta.